Skip to main content
VIA
de
|
en
TO THE SHOP

Subscribe to your portion of inspiration

For monthly news from VIA leave us your name and mail address.

Yes, gladly…

Information on laying pavement slabs

The installation - step by step

pavement panels before processing

The processing temperature should be frost-free:
+5 to +25 °C

Drainage mats are rolled out

Drainage mats are rolled out onto the existing, load-bearing substrate.

 

 

mixing the drainage mortar

The mixing time of the drainage mortar is approx. 5 minutes.

Concrete slab for outdoor use before laying
Concrete slab for outdoor use before laying

Create perpendicular and alignment. Create height measurements.

The substrate must have a slope of at least 2 - 3 % to ensure optimum horizontal drainage.

Preparation for laying concrete slabs
Preparation for laying concrete slabs

In order to achieve a sufficient bond between the paving slab and the single grain mortar, a contact layer of VIA slab adhesive must be applied to the back of the slab.

Laying tiles outdoors with VIA patterns
Laying tiles outdoors with VIA patterns

VIA panel adhesive is applied to the back of the panels as a contact layer.

Laying concrete slab in outdoor area
Laying concrete slab in outdoor area

VIA panel adhesive is applied to the back of the panels as a contact layer.

Structure Laying pavement slabs with single-grain mortar layer
Structure Laying pavement slabs with single-grain mortar layer

 

The single-grain mortar layer must be at least 4 - 8.5 cm thick, depending on the substrate, in order to effectively prevent capillary water rise.

Work for laying pavement slabs in outdoor areas
Work for laying pavement slabs in outdoor areas

 

The VIA paving slabs are laid together with minimal joints, firmly tapped and checked for evenness.

Cleaning

The VIA pavement slabs should not be cleaned with a high-pressure cleaner.